5X-4
510mm High Speed Mill-Drill-Tap Center
- P4-Inch Zero-Backlash Roller Gear Cam Tilting Rotary Table
- P12,000 RPM Inline Direct-Drive Beltless Spindle
- P7.5-HP spindle motor with 6000 RPM Synchronous Rigid Tapping
- PBT #30 BBT Dual Contact “Big-Plus” Spindle
- P21-Tool Drum Turret with 1.6-Second Tool-to-Tool tool change time
- P2,362 IPM rapid rates in X, Y & Z axis for fast production
$0.00 Down Financing
Machine Specifications
Axis Travel
X-Travel |
20.08” 510mm |
Y-Travel |
16.93” 430mm |
Z-Travel |
12.99” 330mm |
Spindle Nose to Rotary Table Surface |
9.05” – 22”, 230 – 560mm |
Spindle Center to Column |
18.50” 470mm |
Spindle
Spindle Motor – Mitsubishi DJ-D5.5/120-01 7.5-HP |
3.7/5.5kw 25% Duty-Cycle |
Spindle Motor Coupling |
Inline Direct-Drive, Beltless Spindle Drive |
Spindle Speed |
12,000 rpm 15,000 RPM optional |
Synchronous Tapping Speed Limit |
6,000 rpm |
Tapping Performance in Production |
M20x2.5 in aluminum, M14x2.0 in steel |
Drilling Performance in Production |
38mm in aluminum, 25mm in steel |
Spindle Torque |
26 ft-lb force, 35Nm up to 1,500 RPM, 17.7Nm continous |
Tool Type |
BT #30, 4-bearing spindle – 2-top, 2-bottom |
Spindle Bearing – Inner Diameter |
40mm, P4 class-7, steel ball bearings |
Spindle Material / Hardness |
SCM415 / HRC 58-62 |
Spindle Runout |
≤ 0.000040” T.I.R., Pull Stud USST B30-4500H |
Retention System / Holding Capacity |
MAS-P30T-1, Bellville Spring Stack / 1650-1760 lbs. |
Axis Feeds
Rapid Traverse – X/Y/Z |
2,362 ipm 60/60/60m / minute |
Rated Cutting Feedrate – X/Y/Z |
0.04 – 1181 ipm 30/30/30m/minute |
Mechanical Way System – X/Y/Z |
Roller-Bearing Ways, Roller-Ways -30/30/35mm width |
Axis Drive Motor Power – X, Y/Z |
2.0-HP / 3.0-HP 1.5kw / 2.2kw with brake |
Axis Thrust Force – X, Y/Z |
3335 lbs. / 3692 lbs. 14840 N / 16430 N |
Ballscrews – X, Y, Z |
32mm Ballscrews, 16mm Pitch |
Positioning Accuracy – X/Y/Z |
±0.00015” ±0.004mm |
Positioning Repeatability – X/Y/Z |
±0.00008” ±0.002mm |
Least Input Command Increment |
0.0001” / 0.000040” 0.001mm / (40-millionths in metric) |
Tool Changer
Tool Capacity |
21-Tools, Drum Turret |
Tool Shank |
BT#30, MAS P30T-1 Pull-Stud |
Tool Change Time |
1.6-sec. tool-to-tool, Servo motor driven |
Maximum Tool Diameter / with adjacent tool |
2.36” / 3.15” 60mm / 80mm with no adjacent tool |
Maximum Tool Length / Weight |
7.87” / 6.6 lbs. 200mm / 3 kg |
Tool Selection / Tool Access |
Random access Bi-directional shortest path |
Specifications
Air Service Requirements |
85 psi @ 5-scfm 6 Kg/cm2 |
Connected Load Electrical Requirements |
16kva, 40 Amps 220vac ±5%, 3-Phase, 60-Hz |
Coolant Tank Capacity |
32-gallons / 120 liters |
Coolant Pump (Cutting Tools) – HP / Pressure |
1.0-HP / 45 PSI, .75kw Grundfos MTH4-30/3A |
Coolant Pump (Chip Flush Pump) |
1.0-HP .75kw |
Floor space requirements (W x D x H) |
49.2” x 105” x 109” 125x267x276cm (+ chip conveyor) |
Machine Weight |
6,408 pounds 2,910 kg |
Warranty – 1-year machine warranty |
3-year Mitsubishi control, motors, & drive warranty |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
TERMS & CONDITIONS | COOKIE POLICY | PRIVACY POLICY | RACING
expandmachinery.com | 818.349.9166 | Copyright © 2015-2022 Expand Machinery, LLC. All Rights Reserved.