52-GTS
6-Axis CNC Dual Gang-Tooled Lathe
- L52 mm 2” Bar Capacity
- LTwin 15 HP 6,000 RPM Opposed Spindles
- LDual Parallel Gang-Tooled Cross-Slides
- LSimultaneous Main & Sub-Spindle Machining
- L“C”-Axis on both spindles for Live Tooling Options
- LFaster than a Twin-Spindle Twin-Turret Lathe
$0.00 Down Financing
Machine Specifications
Main & Sub Spindle
Spindle Motors: 11 kw 30 min rated | 15 HP (Spindle Motor Chiller Included) |
Maximum RPM | 6,000 RPM with Spindle Orient |
Spindle Bearing | 5 Bearing Spindle, 3 Front Ball Bearings, 2 Rear |
Spindle Nose | A2-5 |
Collet Nose | Traub A-52 (3J, 22J, 16C, S20 adapters available) |
Drawtube ID | 2.086” (53 mm) |
Collet Capacity | 2.047” (52 mm) |
Spindle Center Height to Cross Slide | 3.464” (88 mm) |
Spindle Center Height to Floor | 42.2” (1,070 mm) |
Machine Axis
Axis Drives & Motors (1.0 kw) | 1.35 HP Mitsubishi Mel-Pro Motors and Drives | |
X-Axis Travel: Twin Cross-Slides | 13” (330 mm) on Both Gang Slides | |
Z-Axis Travel: Twin Opposed Spindles | 10.63” (270 mm) (on Both Main and Subspindle) | |
Axis Servo Motor Power | X-Axis 2.0 HP (1.5 kw), Z-Axis 1.5 HP (1.0 kw) | |
Rapid Travel Speed – X & Z | 1,181 IPM (30 m / min) | |
Z-Axis Thrust | 714 lbs Thrust (8,574 in / lbs ) | |
Minimum Input Unit | 0.0001” (0.001 mm = 40 millionths of an inch) |
Tooling
OD Turning Tool Size | 3/4” Standard |
ID Turning Tool Size | 20 mm (3/4” Available) |
Cross-Slide T-Slot dimensions | 5-T-Slots on 32mm Centers (10 mm Slot, 18 mm Base) |
Fluid Systems
Coolant Tank Capacity | 52 Gallons (210 L) with Coolant Flow Monitor |
Coolant Pump | Dual 3/4 HP, 45 PSI Pumps (for Main and Subspindle) |
Hydraulic System: (550 PSI) | 10 gallons (45 liters) ISO VG32 (Mobil DTE-24) |
Spindle Oil Cooler System | 5.5 gallons (25 liters) ISO 10 (Mobil Velocite No. 6) |
Way Lubrication Distribution (ISO-VG68) | .5 gallons (2 liters) Distributed at 3 – 6 cc / 15 min Cycle |
Machine Dimensions
Length | 118” (2,980 mm) + 25″ Chip Conveyor |
Width | 54” (1,356 mm) + 21” Coolant Tank |
Height | 78” (1,760 mm) |
Net Weight | 9,922 lbs (4,500 kg) |
Machine Requirements
Power Requirements | 220 vac ±5%, 3 Phase, 60 Hz, 63 amps, 24 kVA |
Air Requirements | 85 PSI, 10 cfm (Parts Catcher, Parts Ejector, Air Blast) |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Machine Info
Take a moment to fill this out and one of our team members will send you information about this machine.
