GTD-30
30” Heavy Duty Engine Lathe
- LRapid Feeds for longitudinal and & cross motion
- L15-HP Spindle motor
- L12-Spindle Speed Gear-Ranges for High-Torque
- LSpindle Speeds from 23 – 1300 RPM
- LA2-11 Spindle with 4-1/8” spindle bore
- LSwings 40.5” Through the Gap Bed
$0.00 Down Financing
Machine Specifications
Capacity & Dimensions
|
Swing over Bed |
29.92″ |
(760 mm) |
|
Swing over Cross Slide |
19.69″ |
(500 mm) |
|
Swing thru Gap |
40.55″ |
(1030 mm) |
|
Width of Gap (measured from spindle nose) |
12″ |
(305 mm) |
|
Bed Width |
16.54″ |
(420 mm) |
Spindle
|
Spindle Motor Horsepower |
15 HP |
11.5 kw |
|
Spindle Speeds – 12 speeds 15 – 1,200 RPM (high to low) |
||
|
Spindle Bore |
4 1/8″ |
(105 mm) |
|
Spindle Nose |
A2 – 11 |
A2 – 11 |
|
Spindle taper in Spindle Nose |
MT-7 |
MT-7 |
|
Spindle taper reduction sleeve provided |
MT-5 |
MT-5 |
|
Spindle Max Weight Capacity (Chuck Only) |
1,100 lbs |
(500 kgs) |
|
Spindle Max Weight Capacity (Chuck and Tailstock) |
2,200 lbs |
(1000 kgs) |
|
Spindle Max Weight Capacity (Chuck, Steady Rest & Tailstock) |
4,400 lbs |
(2000 kgs) |
Carriage
|
Cross Slide Travel |
15.75″ |
(400 mm) |
|
Carriage Width |
26.38″ |
(670 mm) |
Compound
|
Compound Rest Travel |
9.45″ |
(240 mm) |
|
Cutting Tool Height Maximum |
1.0″ |
(25 mm) |
Tailstock (2 speed quill advance)
|
Quill Diameter |
3.15″ |
(80 mm) |
|
Quill Stroke |
7.87″ |
(200 mm) |
|
Quill Taper |
MT-5 |
Morse Taper #5 |
|
Quill Tange Drive and drift-slot for tailstock |
included |
included |
|
Tailstock Body set-over adjustment |
±1/2″ |
(±13 mm) |
Thread Cutting
|
Lead screw diameter & pitch |
1.77″ x 2 TPI |
|
Thread Cutting Range – 36″ pitches |
2 – 28 TPI |
|
Thread Cutting Range – 65 metric pitches |
0.8 – 14 mm |
|
Thread Cutting Range – 36 diametral pitches |
4 – 56 D.P. |
|
Thread Cutting Range – 22 module pitches |
0.5 – 7 M.P. |
Feeds
|
Feeds – Longitudinal |
0.0019″ – 0.027″ / rev. 0.05 – .7 mm / rev |
|
Feeds – Cross |
0.00098″ – 0.0137″/ rev. 0.025 – 0.35 mm / rev. |
|
Feed shaft stop control |
4 adjustable automatic feed stops to disengage the longitudinal feed |
|
Feed Rod Diameter |
1.26″ (32 mm) |
Electrical Requirements
|
Connected Load – 12 kw |
10 kVA / 220 vac / 42 amps / (440 vac optional) |
|
|
Rapid Traverse Motor |
1/4 HP |
(0.1875 kw) |
|
Coolant Motor / Coolant Tank Capacity |
1/8 HP / 11 gal |
(40 liters) |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Machine Info
Take a moment to fill this out and one of our team members will send you information about this machine.
