GMV-5
12” X 58” Super Heavy Duty 40 Taper Milling Machine
- L5-HP spindle motor
- L#40 taper heavy duty spindle
- LHardened and ground square boxways in “Y” and “Z”
- LHardened and ground table and T-slots
- LHardened, ground and chrome- plated quill
- LABEC class-7 precision spindle bearings
$0.00 Down Financing
Machine Specifications
Table
|
Table Size (W x L) |
12″ x 58″ |
(305 x 1473mm) |
|
T-slot Width (3 Hardened & Ground T-Slots) |
5/8″ with ground reference edges (15.9mm wide) |
|
|
Table Capacity |
1500 lbs |
Machine Travels & Capacity
|
Table Travel – X Axis (With or without Power Feed) |
40.5″ |
(1028mm) |
|
Cross Travel – Y Axis |
15.75″ |
(400mm) |
|
Knee Travel – Z Axis |
16″ |
(406mm) |
|
Ram Travel (Overarm) / Swivel |
17.7″ |
(450mm) |
|
Spindle Nose-to-Table Surface Travel |
2″ – 18″ |
(50 – 457mm) |
|
Quill Travel – Manual & Power Feed |
5″ |
(127mm) |
|
Quill Feeds – With Trip Release – Inch |
0.0015″ / 0.003″ / 0.006″ |
|
|
Quill Feeds – With Trip Release – Metric |
0.04mm / 0.08mm / 0.16mm |
|
|
Quill Diameter |
4.13″ |
(105mm) |
|
Leadscrew ground pitch (X & Y) |
0.2″ per rev. (5mm) |
Slide Ways
|
Hardened & Ground Meehanite Cast Iron |
|
|
Longitudinal Table –X Axis |
Hardened & Ground Doevetail Ways |
|
Cross Slide to Knee –Y Axis |
Hardened & Ground Square Box Ways |
|
Knee to Column – Z Axis |
Hardened & Ground Square Box Ways |
Spindle Head
|
Head Tilt (Left-to-Right) |
90° – 0 – 90° |
|
Head Tilt (Front-to-Back / Up-Down) |
45° – 0 – 45° |
|
Head Swivel |
360° |
|
Spindle Motor |
5 HP / 3 Phase / 220 Vac. |
|
Spindle Taper |
NT #40-Taper |
|
Spindle Runout |
0.0002″ maximum runout (0.005mm) |
|
Spindle Bearings |
ABEC-7 matched set of Class-7 bearings |
|
Variable Speed Drive – Dual Range |
80 – 520 rpm (low-range) / 600 – 4000 rpm (high-range) |
|
NOTE: 5,000 RPM Spindle available with optional |
Dimensions & Weight
|
Power Requirements 3-Phase Power |
220 vac @ 26-amps |
|
|
Machine Weight |
3740 lbs. |
(1700 kg) |
|
Coolant Capacity |
13.5 – Gallons |
(51 liters) |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Machine Info
Take a moment to fill this out and one of our team members will send you information about this machine.
TERMS OF USE | PRIVACY POLICY | RACING
expandmachinery.com | 818.349.9166 | Copyright © 2015-2021 Expand Machinery, LLC. All Rights Reserved.
