T-500
510mm High Speed Mill-Drill-Tap Center
- L12,000 RPM Inline Direct-Drive Beltless Spindle
- L21-Tool Drum Turret
- LTool Change Time 1.6-sec. tool-to-tool,Servo motor driven
- L2,362 Inch per Minute Rapid Rates
- LBT#30 BBT Dual Contact Big-Plus Spindle
- L6,000 RPM Synchronous Rigid Tapping
$0.00 Down Financing
Machine Specifications
Axis Travel
|
X-Travel |
20.08” 510mm |
|
Y-Travel |
16.93” 430mm |
|
Z-Travel |
12.99” 330mm |
|
Spindle Nose to Rotary Table Surface |
5.1” – 18.1”, 130 – 460mm |
|
Spindle Center to Column |
18.89” 480mm |
Work Table
|
Table Surface Dimension (X, Y) |
22.04” x 15.75”, 560 x 400mm |
|
T-Slot Dimension / Spacing |
3-14mm T-slots / 125mm center distance spacing |
|
Table Height |
35” above floor, 890mm |
|
Maximum Table Weight for Rated Accuracy |
550 pounds, 250kg @ 60m/min (770 lbs. @ 48m/min.) |
Spindle
|
Spindle Motor – Mitsubishi DJ-D5.5/120-01 |
7.5-HP, 3.7/5.5kw 25% Duty-Cycle |
|
Spindle Motor Coupling |
Inline Direct-Drive, Beltless Spindle Drive |
|
Spindle Speed |
12,000 rpm, 15,000 RPM optional |
|
Synchronous Tapping Speed Limit |
6,000 rpm |
|
Tapping Performance in Production |
M20x2.5 in aluminum, M14x2.0 in steel |
|
Drilling Performance in Production |
38mm in aluminum, 25mm in steel
|
|
Spindle Torque |
26 ft-lb @ 1,500 rpm, 25% Duty-Cycle |
|
Tool Type |
BT #30, 4-bearing spindle – 2-top, 2-bottom |
|
Spindle Bearing – Inner Diameter |
40mm, P4 class-7, Steel Ball Bearings |
|
Spindle Material / Hardness |
SCM415 / HRC 58-62 |
|
Spindle Runout |
≤ 0.000040” T.I.R. |
|
Retention System / Holding Capacity |
MAS-P30T-1 Bellville Spring Stack / 1650-1760 lbs. |
Axis Feeds
|
Rapid Traverse – X/Y/Z |
2,362 ipm 60/60/60 /minute |
|
Rated Cutting Feedrate – X/Y/Z |
0.04 – 1181 ipm 30/30/30m/minute |
|
Mechanical Way System – X/Y/Z |
Roller-Bearing Ways, Roller-Ways -30/30/35mm width |
|
Axis Drive Motor Power – X, Y/Z |
2.0-HP / 3.0-HP 1.5kw / 2.2kw with brake |
|
Axis Thrust Force – X, Y/Z |
3335 lbs. / 3692 lbs. 14840 N / 16430 N |
|
Ballscrews – X, Y, Z |
32mm Ballscrews, 16mm Pitch |
|
Positioning Accuracy – X/Y/Z |
±0.00015” ±0.004mm |
|
Positioning Repeatability – X/Y/Z |
±0.00008” ±0.002mm |
|
Least Input Command Increment |
0.0001” / 0.000040” 0.001mm / (40-millionths in metric) |
Tool Changer
|
Tool Capacity |
21-Tools, Drum Turret |
|
Tool Shank |
BT#30, MAS P30T-1 Pull-Stud |
|
Tool Change Time |
1.6-sec. tool-to-tool, Servo motor driven |
|
Maximum Tool Diameter / with adjacent tool |
2.36” / 3.15” 60mm / 80mm with no adjacent tool |
|
Maximum Tool Length / Weight |
7.87” / 6.6 lbs. 200mm / 3 kg |
|
Tool Selection / Tool Access |
Random access Bi-directional shortest path |
Specifications
|
Air Service Requirements |
85 psi @ 5-scfm 6 Kg/cm2 |
|
Connected Load Electrical Requirements |
40 Amps / 220vac ±5%, 60-Hz |
|
Coolant Tank Capacity |
32-gallons / 120 liters |
|
Coolant Pump (Cutting Tools) – HP / Pressure |
1.0-HP / 45 PSI, .75kw Grundfos MTH4-30/3A |
|
Coolant Pump (Chip Flush Pump) |
1.0-HP .75kw |
|
Floor space requirements (W x D x H) |
50” x 87” x 95” 125x221x241cm (+ chip conveyor) |
|
Machine Weight |
6,110 pounds, 2,770 kg |
|
Warranty – 1-year machine warranty |
3-year Mitsubishi control, motors, & drive warranty |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Machine Info
Take a moment to fill this out and one of our team members will send you information about this machine.
TERMS & CONDITIONS | COOKIE POLICY | PRIVACY POLICY | RACING
expandmachinery.com | 818.349.9166 | Copyright © 2015-2022 Expand Machinery, LLC. All Rights Reserved.
