700mm High Speed Mill-Drill-Tap Center

Table Surface Dimension (X, Y)

33.4” x 15.75”, 850 x 400mm

T-Slot Dimension

3-14mm T-slots / 125mm center distance spacing

Table Height

35” above floor, 890mm

Maximum Table Weight

550 pounds, 250kg @ 60m/min (770 lbs. @ 48m/min.)

Spindle Motor – Mitsubishi DJ-D5.5/120-01

7.5-HP, 3.7/5.5kw 25% Duty-Cycle 

Spindle Motor Coupling

Inline Direct-Drive, Beltless Spindle Drive

Spindle Speed

12,000 rpm, 15,000 RPM optional

Synchronous Tapping Speed

6,000 rpm

Tapping Performance in Production

M20x2.5 in aluminum, M14x2.0 in steel

Drilling Performance in Production

38mm in aluminum, 25mm in steel

Spindle Torque

26 ft-lb @ 1,500 rpm

Tool Type

BT #30, 4-bearing spindle – 2-top, 2-bottom

Spindle Bearing – Inner Diameter

40mm, P4 class-7, Steel Ball Bearings

Spindle Material / Hardness

SCM415 / HRC 58-62

Spindle Runout

≤ 0.000040” T.I.R.

Retention System / Holding Capacity

MAS-P30T-1 Bellville Spring Stack / 1650-1760 lbs. 

Rapid Traverse – X/Y/Z

2,362 ipm 60/60/60m / minute

Rated Cutting Feedrate – X/Y/Z

0.04 – 1181 ipm 30/30/30m/min.

Mechanical Way System – X/Y/Z

Roller Ways, Cross Roller 30/30/35mm width

Axis Drive Motor Power – X, Y/Z

2.0-HP / 3.0-HP 1.5kw / 2.2kw with brake

Axis Thrust Force – X, Y/Z

3335 lbs. / 3692 lbs. 14840 N / 16430 N

Ballscrews – X, Y, Z

32mm Ballscrews, 16mm Pitch

Positioning Accuracy  – X/Y/Z

±0.00015” ±0.004mm

Positioning Repeatability – X/Y/Z

±0.00008” ±0.002mm

Least Input Command Increment

0.0001” / 0.000040”  0.001mm / (40-millionths in metric)

Tool Capacity

21-Tools, Drum Turret

Tool Shank

BT#30, MAS P30T-1 Pull-Stud

Tool Change Time

1.6-sec. tool-to-tool, Servo motor driven

Maximum Tool Diameter / with adjacent tool

2.36” / 3.15” 60mm / 80mm with no adjacent tool

Maximum Tool Length / Weight

7.87” / 6.6 lbs. 200mm / 3 kg

Tool Selection / Tool Access

Random access Bi-directional shortest path

Air Service Requirements

85 psi @ 5-scfm 6 Kg/cm²

Connected Load Electrical Requirements 

40 Amps / 220vac ±5%, 60-Hz

Coolant Tank Capacity

40-gallons / 150 liters

Coolant Pump (Cutting Tools) –  HP / Pressure

1.0-HP / 45 PSI, .75kw Grundfos MTH4-30/3A

Coolant Pump (Chip Flush Pump)

1.0-HP .75kw

Floor space requirements (W x D x H)

73” x 87” x 95” 185x221x241cm (+ chip conveyor)

Machine Weight

6,770 pounds, 3,070 kg

Warranty – 1-year machine warranty

3-year Mitsubishi control, motors, & drive warranty